Standards

DIN

AISI

JIS

ГОСТ

X155CrVMo12-1

1.2379

D2

SKD11

Х12МФ

C

Si

Mn

P

S

Cr

Mo

V

1.45-1.60

0.10-0.40

0.15-0.45

≤0.030

≤0.030

11.0-13.0

0.70-1.00

0.70-1.10

Steel properties :

Chrome-molybdenum-vanadium steel with big hardenability for hardening in oil and in air, especially high resistance to the wear (higher than by 1.2080), good cutting power, very good firmness in the pressure, lower toughness (but higher than by 1.2080). This steel shows good dimensional stability at the heat treatment, suitable for hardening to the secondary hardness (the possibility of nitriding). Further the steel is very difficult to sharpen, it works at the heat with difficulties and has a rather difficult workability in the annealed state.

Applications :

Cutting, punching, stamping tools, shear blades, thread rolling dies, drawing and bending tools, flanging and straightening rolls, deep drawing tools, plastic mould for abrasive polymers, cold extrusion dies, dawing dies etc.

Size range :

Diameter (mm)

Thickness (mm)

Width (mm)

8 - 450

8 - 350

Max 810

Delivery condition :

Soft annealed to max. 250 HB

Soft annealing

Temperature(°C)

Cooling

Hardness

800 - 850

furnace

max. 250 HB

Forging

Temperature(°C)

Cooling

850 - 1050

furnace

Hardening

Temperature(°C)

Cooling

Tempering

1000 - 1090

oil or air or hot bath

see tempering diagram

usually 150 - 540°C